audi08.18.2010

This is the first Q7 set we’ve done at oCarbon and it is a beauty.  It was done in a 4×4 twill and so far is looking fantastic.  Currently it is being trimmed and sanded and will be clearcoated in the next few days.  Won’t be very much longer before it is finished up and installed.

Few shots of the door pieces.  These pieces are particularly interesting because they have LED lighting underneath them.  Should be a very cool effect once they are installed.

Last few photos are of the shifter surround.

audi, carbon fiber08.13.2010

Those of you that are following the blog know that we’ve been making a bunch of sets with new, custom fabric.  Now we’ve got the first B5 set with the 8 harness satin (8HS) weave.  It is the same type of fabric found on the B8 Audi S4 and S5 OEM carbon fiber trim, so it is kind of cool to see it in a B5.  Keep in mind these pieces aren’t finished yet, they still need to be polished up, so there are a few imperfections still on the surface.

Stay tuned for more sets on different makes/models with this fabric.

These last two shots are comparison photos of the 8HS and the 20oz 2×2 twill.

audi08.11.2010

I’m slowly but surely making progress and completing sets.  I think I will be finishing 2-3 more before the end of the week and probably most, if not all, of the remaining sets by the end of next week.

If you participated in the group buy, keep a look out for an email from FedEx with your tracking number, as it should be hitting your inbox shortly…

uncategorized08.09.2010

I had posted up about a few custom B8 sets we’ve been working on and we finally got the first one wrapped up.  I’m really happy with how it turned out and can’t wait to get some pictures back of it installed.

I hope to have the other custom B8 sets finished by the end of the week.

You can compare these new 20oz shots to some older 11oz 2×2 twill B8 sets we made a few months ago.

audi, production07.27.2010

We’ve done a few B8 A4/S4 carbon fiber sets of trim so far, but up until now they have all been the standard 11oz 2×2 twill (you can see some of those sets in the B8 gallery).

We recently got a bunch of B8 cores from Germany so we figured it would be time to start getting a little more custom with some of them.  I’m hoping to have these sets trimmed and sanded smooth sometime next week so I can clearcoat them.  I’ll post more pictures as I make further progress on them.

First is the 20oz 2×2 twill.  This is the same fabric found on the B7 RS4 OEM carbon fiber trim.  The weave is twice as thick as the standard 11oz 2×2 twill.  I’ve done some blog posts comparing the 20oz and 11oz in the past.  Side by side it becomes apparent how much nicer the 20oz is.

Few close ups of the 20oz.

Up next we have a harness satin weave, known as 8HS.  I believe this fabric is very similar to the B8 OEM carbon fiber trim.

Up close you can see how tight the weave is.

Few more shots of the 8HS.

Lastly we have another harness satin weave, but this time it is a 5HS.  It is basically the same thing as the 8HS but with thicker bunches of fiber.

Few close ups of the 5HS.

Lastly we have some B5 pics of the 8HS.  We’re also currently working on a B6/B7 set with the 5HS.  Hopefully I can post some updates on these sets soon.