Started working on Audi B pillars…

by matt@ocarbon June 13, 2011

I had a B5 S4 Avant customer who purchased a set of interior trim and wanted and wanted a little something extra for his exterior as well. He asked if I could do the B and C pillars for his S4.

It took us a little while, but we were able to get it sorted. These are full replacement parts made with OEM pillars, wrapped in 20oz 2×2 twill carbon fiber:

We’ve also started some B6/B7 pillars:

OEM pillars are stripped and prepped.

Epoxy is applied and the fabric is wrapped.

Extra fabric is removed.

Epoxy is spread on and built up. This will be cured in a week or so and ready to be sanded smooth.

I’ve even got a custom set of 5HS pillars in the works for my buddy Nick. He’s got a one of a kind set of 5HS carbon fiber interior trim. He’s also got a 5HS carbon fiber front plate too, hopefully we’ll see some installed pictures of that soon.