We just wrapped up and shipped off this 6 piece BMW e92 M3 beltline set of trim (the beltline trim is just around the beltline of the car, with no shifter or other pieces). We did this set in a 1×1 fabric, to match the M3’s OEM carbon fiber roof.
We just got done with our first set of B8.5 “OEM” carbon fiber trim. We say “OEM” in quotes because its done with an 8HS fabric to match the OEM Carbon Atlas trim. I’ve documented the entire process of how we manufacture these, from start to finish. Hopefully after checking out this blog post, you […]
Finished polishing the 1 series trim and snapped a few more pictures of it before I packaged it up and shipped it off to its new owner. Should be there in a few days and hopefully we can get some good installed pictures of it.
Made these for an RS5 owner, but I’m pretty sure they will fit quite a few B8 wheels. I’m really happy with how they turned out and can’t wait to see what they look like installed. You might remember some of our previous B8 center caps. Starts off as a bare cap, wrapped in carbon. […]
Just got our first 1 series set of core trim to start working on. Here is the progress we’ve made so far. What started out as wood was ground down to make room for the added material of the carbon fiber, epoxy, and clearcoat. Laying out the pieces, to determine how much to cut off […]
We’ve made a lot of progress on this trim over the last week or so. Should have it ready to ship very soon. These pieces have been trimmed, sanded, and clearcoated. They still need to be wetsanded and polished. Small dash and ashtray pieces. On the large dash piece, we were able to retain the […]
We’ve got the epoxy on now, and they’re really taking shape. We’ll put these in the oven for a few days to help speed up the cure, then we’ll trim off all the excess carbon and start sanding the epoxy smooth. More pics to come soon.
I’ve got this e90 set of trim finished up and ready to ship. It’s a full 8 piece set. It includes 2 dash pieces, 4 door pieces, ashtray cover, and a non iDrive, manual shifter piece. It was made with an 11oz 2×2 twill fabric. Price is $800, with a $400 refundable core deposit (core […]
In an effort to start offering products to new makes and models, we recently put a call out to see if we could find some high end car owners willing to send us their interior trim so we could work our magic. The first person we found was a 2011 535i owner, and he got […]
We are looking to expand our make and model offerings on interior trim parts, so we’d like to find some owners of some high end European vehicles to help us out. We’re going to offer real carbon fiber trim sets at HUGE discounts to people who are willing to send in their trim to us […]
just needs a quick wetsand and polish and it will be ready to get shipped out to the customer. We used an upgraded 20oz 2×2 twill fabric on it, with the weave going in all one direction. Very happy with how it turned out.