Finished polishing the 1 series trim and snapped a few more pictures of it before I packaged it up and shipped it off to its new owner. Should be there in a few days and hopefully we can get some good installed pictures of it.
Just got our first 1 series set of core trim to start working on. Here is the progress we’ve made so far. What started out as wood was ground down to make room for the added material of the carbon fiber, epoxy, and clearcoat. Laying out the pieces, to determine how much to cut off […]
just needs a quick wetsand and polish and it will be ready to get shipped out to the customer. We used an upgraded 20oz 2×2 twill fabric on it, with the weave going in all one direction. Very happy with how it turned out.
We’ve done a few BMW sets in the past, mostly e46 and e90 sets, but now we’re about halfway done with our first M5 set. I’m really happy with how it is turning out so far, particularly the shifter piece. I can’t wait to finish this set up and see how it looks installed. We […]
Big thanks to my friend Joey at EuroAddiction for being the first to get some parts made for his 911 GT3 as well as Angela Pappas at Fl@sh Photography for taking the time to get some pictures done for us. These parts were made with a custom 20oz 2×2 twill fabric, which uses almost 4 times as much […]
if anyone is interested. These sets just need to be polished and could be shipped out the day after payment has been made. Good opportunity to get a set that is ready to go without the normal 3-4 week lead time. These sets were done in an upgraded 20oz 2×2 twill fabric (the same fabric that […]
Want to win our carbon fiber funnel? We’re giving it away to the first person who can win our little scavenger hunt. First person to post the correct answer in response to this post on our Facebook page will get the funnel. Only one guess per person, so make your first guess count. Ready to […]
Got another round of Porsche GT3 parts done for my buddy Joey. After he gets these installed he’s promised a bunch of installed pictures, which I’m really looking forward to. Up first is the speedometer cluster surround (it is upside down in this picture). It is some times called “the Batwing” for obvious reasons. Up […]
A few months ago, there was a pretty funny post on Audizine involving a funnel (I’m sure a few of you know what I’m talking about). To celebrate what has become an inside joke on the forums, we went ahead and made the worlds best carbon fiber funnel and we’re giving it away to one of […]
I made these pieces for a former Audi customer of mine. He was one of the first Audi’s to get a set made in the 20oz 2×2 twill (probably the first B6S4 owner to have it done). 2 years later, him and I are good friends and when he sold his B6S4 and stepped into […]
I had a B5 S4 Avant customer who purchased a set of interior trim and wanted and wanted a little something extra for his exterior as well. He asked if I could do the B and C pillars for his S4. It took us a little while, but we were able to get it sorted. […]
Custom order from a very good customer of mine. OEM 5 star center caps wrapped in 20oz 2×2 twill. I’m very excited to see how these look on the car. I love subtle touches of carbon like this that might not get noticed by the average person.
