I had a B5 S4 Avant customer who purchased a set of interior trim and wanted and wanted a little something extra for his exterior as well. He asked if I could do the B and C pillars for his S4. It took us a little while, but we were able to get it sorted. […]
A few months ago I got in contact with a member on Audizine to see if he was interested in having my first custom yellow carbon/kevlar trim set in his car. He happily obliged. I worked on his set and watched the progress he made on his car. So while it has taken a while to get […]
I’ve done a few blue and red carbon kevlar sets for the B8 recently, so I figured I’d give a go at some colored B5 sets. These sets are in the beginning stages of production and will darken up considerably once the resin and clearcoat has been applied, but you can get a good idea […]
Those of you that are following the blog know that we’ve been making a bunch of sets with new, custom fabric. Now we’ve got the first B5 set with the 8 harness satin (8HS) weave. It is the same type of fabric found on the B8 Audi S4 and S5 OEM carbon fiber trim, so […]
and once again I’m very happy with the results. When you see the images of this set right after it was clearcoated, you may notice specs of dust or imperfections in the clear. All of these need to be wetsanded and polished out of the finish. After wetsanding with high grit sandpaper (1500+) the set […]
Few shots of some custom B5 beltline sets that I’ve been working on recently. First up is a plain weave set. It’s very similar to a standard 11oz 2×2 twill set, the weave is just slightly different. This plain is 9oz 1×1 weave. It’s got more of a checkerboard look the diagonal the twill sets […]
all polished up. The colors seem a little weird in the photos, but I think it’s just my camera and the poor florescent lighting in the shop. Hopefully when I get some installed pics of the set in the car in natural lighting the color will be much more uniform.
This set still needs to be wetsanded and polished, but it turned out pretty solid. I’m really enjoying all these custom sets that people are ordering. Stay tuned for more images of this set, it’s going in a monster widebody Imola S4.
Finished this set a few days ago and finally found the time to post some pics of it. It turned out way better than I expected and has really grown on me. The 4×4 twill is commonly seen on high-end supercars, like the Pagani Zonda and the Koenigsegg CCX. A close up of the weave. […]
This was special ordered for a customer of mine. I’m not going to go into any details about the car its going on right now, but I’m pretty excited about it. Stay tuned for more…
