Just got this set polished up and shipped out. Turned out fantastic. We did these in a custom 4×4 twill fabric. First time we’ve ever done a CTS-V shift knob.
A former Audi customer of mine contacted me a few weeks ago about doing a custom set of carbon fiber trim for his 2008 Cadillac CTS-V. I’ve always wanted to do a higher end American car, especially one that performs as well as the CTS-V, so I happily obliged. The trim I got from him is […]
A ton of progress on the Q7 set has been made. Sanded, trimmed, and clearcoated. It will be polished and shipped out in the next few days. All of the pieces have the extra fabric trimmed from the edges. At this point the pieces were still pretty lumpy, so they were block sanded smooth. Getting […]
This is the first Q7 set we’ve done at oCarbon and it is a beauty. It was done in a 4×4 twill and so far is looking fantastic. Currently it is being trimmed and sanded and will be clearcoated in the next few days. Won’t be very much longer before it is finished up and […]
I’ve been working on this set for a long time now, but I wanted to make sure it was perfect since it’s for a friend of mine. He got one of my 5.6oz 2×2 twill sets a little over 2 years ago and was looking for a change. Originally I attempted a silver texalium set […]
Finished this set a few days ago and finally found the time to post some pics of it. It turned out way better than I expected and has really grown on me. The 4×4 twill is commonly seen on high-end supercars, like the Pagani Zonda and the Koenigsegg CCX. A close up of the weave. […]