we’ve done lately. B8 Audi: B6/B7 Audi: We’re also working on silver sets for a C5 Audi RS6 and a B5 Audi S4, so keep a look out for those on the blog.
A former Audi customer of mine contacted me a few weeks ago about doing a custom set of carbon fiber trim for his 2008 Cadillac CTS-V. I’ve always wanted to do a higher end American car, especially one that performs as well as the CTS-V, so I happily obliged. The trim I got from him is […]
I have been promised better pictures this weekend when the owner has a bit more time to take proper ones. He says he is very happy with the pieces. They all fit perfectly and the install was “a breeze.” He did note that there were some subtle differences between the fabrics but they are unnoticeable once the […]
and I couldn’t be happier. I’m sorry these aren’t the best photos, but I wanted to post these up today because of how great they turned out. I’ll get the mini studio setup later this weekend and take some better photos and post them on Monday. MMI piece re-assembled. I will not be including the […]
Over the past few weeks I’ve been working on various improvements to help with the production of the B8 “OEM” carbon fiber vent and MMI pieces. I spent the last day or so making simple foam molds that help support the pieces under vacuum. Previous brackets would cave in under full vacuum. Running the pump […]
We’ve made a bunch of progress on these pieces in the last week or so. First and foremost, we got the bag system running multiple parts now. We’ve also made an upgrade to the molds that I’ll detail in a separate post because it is a neat little process. We’ve also had to deal with […]
We have a few more interior shots from the Adam’s Rotors feature on StanceWorks. A full, detailed write up can be found here: http://www.stanceworks.com/2011/02/rotors8/ This set was a custom made 9oz plain weave. I’ve only done a few sets in this particular fabric, so it’s pretty rare. The Adam’s Rotors logo embedded in the epoxy […]
A few months ago Adam from Adam’s Rotors approached me about doing a custom set for his Project S8, which has been uniquely dubbed ROTORS8. At first I was a little hesitant, as the A8/S8 sets are large and cumbersome, but after talking with Adam for a bit I decided to press ahead. Working with him over […]
