Made these for an RS5 owner, but I’m pretty sure they will fit quite a few B8 wheels. I’m really happy with how they turned out and can’t wait to see what they look like installed. You might remember some of our previous B8 center caps. Starts off as a bare cap, wrapped in carbon. […]
We’ve got the epoxy on now, and they’re really taking shape. We’ll put these in the oven for a few days to help speed up the cure, then we’ll trim off all the excess carbon and start sanding the epoxy smooth. More pics to come soon.
I’ve got this e90 set of trim finished up and ready to ship. It’s a full 8 piece set. It includes 2 dash pieces, 4 door pieces, ashtray cover, and a non iDrive, manual shifter piece. It was made with an 11oz 2×2 twill fabric. Price is $800, with a $400 refundable core deposit (core […]
In an effort to start offering products to new makes and models, we recently put a call out to see if we could find some high end car owners willing to send us their interior trim so we could work our magic. The first person we found was a 2011 535i owner, and he got […]
These were done in the standard 2×2 twill fabric, so they’ve got a traditional carbon fiber look. I can’t wait to see some installed pictures so we can add them to the CTS-V gallery.
Just got done clearcoating the first set made with the new 5 harness satin (5HS) fabric I just got in. It is a 6k 11oz fabric, so it is pretty high quality. At first I wasn’t really sure how I felt about it from an aesthetic standpoint, but now seeing these pieces finally clearcoated I’m pretty happy […]
I’ve been anxious to see what this setup would look like for a while now, so I was happy to finally get some decent photos. I think it fits pretty well with the two tone interior and adds a nice contrast. Rest of the gallery can be found here: Barry’s A4.
Got the C6 A6 shifter back together again. It was much more challenging than I had anticipated, but now that it is finally done The two ashtray covers. Two side blades. Shifter frame. First the side blades are attached. Then the ashtray covers are attached. And finally, after a bunch of tiny screws, the shifter […]
Lots of progress on the B8 vent and MMI pieces. These will be getting sent out on Monday so hopefully we’ll have some installed pictures shortly. Before we start, the black pieces are for the B8 A4/S4 and are done in a 11oz 2×2 twill. The red pieces are for a B8 A5/S5 and are […]
Still working on the shifter plate but I got some images of the dash and door pieces installed. I think it turned out very nice with the metal trim around the carbon fiber.
Took me a while, but this set is finally done. Had some trouble with the metal edges of the trim. I couldn’t get them to stay in place long enough for the glue to set, so they kept popping out of place. Ended up having to use some quick setting epoxy to get everything to […]
Few pics of the first of many pieces for Coran’s B6 A4. First up are the seatbacks. These are all cleaned up and ready for clearcoat. I’ll be dropping them off at a bodyshop to be clearcoated later this week. They are just too big for me to handle the clearcoating on my own and […]
