I’m just about to start polishing these silver pieces for an RS6 and figured I’d snap some pictures since they look so good. This set is going into a white C5 RS6 with a black interior, so I think the silver carbon is really going to set it off. Hopefully we get some nice pictures […]
I’ve got another custom kevlar set that just got shipped out to a C5 A6 owner. He should be receiving it any day now, so hopefully we’ll get some installed pictures soon. Up next to be polished: Another custom C5 A6 set, but this time in red.
Got a 20oz 2×2 twill clearcoated. We took it out in the sun to try and get some good photos of it. Pretty crazy how much better it looks in some decent lighting. I’ll try and do this more often with sets. You can see some orange peel that still needs to get wetsanded and […]
Got the C6 A6 shifter back together again. It was much more challenging than I had anticipated, but now that it is finally done The two ashtray covers. Two side blades. Shifter frame. First the side blades are attached. Then the ashtray covers are attached. And finally, after a bunch of tiny screws, the shifter […]
Still working on the shifter plate but I got some images of the dash and door pieces installed. I think it turned out very nice with the metal trim around the carbon fiber.
Took me a while, but this set is finally done. Had some trouble with the metal edges of the trim. I couldn’t get them to stay in place long enough for the glue to set, so they kept popping out of place. Ended up having to use some quick setting epoxy to get everything to […]
Another new model we’ve been working on lately, the C6 A6. It is very near completion and will be sent to the customer in a week or so. I went with the standard 11oz 2×2 twill because I wanted to be sure the pieces weren’t too thick for the metal edges (more on that in […]
I just realized I never posted any pictures of my first C5 A6 carbon fiber trim set. These have been sent to a customer in Canada but they’ve yet to arrive. Hopefully he gets them soon so I can get some images of them installed. I’m really happy with how it turned out.
