Got the C6 A6 shifter back together again. It was much more challenging than I had anticipated, but now that it is finally done The two ashtray covers. Two side blades. Shifter frame. First the side blades are attached. Then the ashtray covers are attached. And finally, after a bunch of tiny screws, the shifter […]
Still working on the shifter plate but I got some images of the dash and door pieces installed. I think it turned out very nice with the metal trim around the carbon fiber.
Took me a while, but this set is finally done. Had some trouble with the metal edges of the trim. I couldn’t get them to stay in place long enough for the glue to set, so they kept popping out of place. Ended up having to use some quick setting epoxy to get everything to […]
Another new model we’ve been working on lately, the C6 A6. It is very near completion and will be sent to the customer in a week or so. I went with the standard 11oz 2×2 twill because I wanted to be sure the pieces weren’t too thick for the metal edges (more on that in […]
