Want a free sample of raw carbon fiber?

I’ve been saving scraps that I trim away from the parts I make for a few months now and have a HUGE stockpile of them, so I decided to start giving them away as free samples.  Most of the samples will be the standard fiber I use, 11oz 2×2 6k twill.  However, I have some specialty fiber samples as well, so some people might get multiple samples.

The typical sample is probably going to be about 2″x4″ but since they were scraps they will come in all different shapes and sizes.  Some people will get bigger pieces, some will get smaller pieces, so it’s all luck of the draw.

To claim your sample, follow these steps:

1)  Become a fan of oCarbon on Facebook.  If you’re already a fan of ours, you can skip to step two.

2) After you’ve become our fan on Facebook, we’ll need you to send an email to samples@ocarbon.com.  In the subject line put “free sample.”  In the body of the email, put your full name and the address you want your sample sent to.  That’s it.

Once a week we’ll gather up the sample requests that have been emailed to us, match them up with the fans on Facebook, and send out the samples.

And don’t worry, your information is safe with us.  We promise never to share or sell your information with anyone.  We also won’t sign you up for any annoying email newsletter or send you a bunch of unsolicited emails.  We hate spam just as much as you do.

Feel free to share this post with your friends and post it on the Audi forums, but please, lets keep it within the Euro community.  I’d hate to run out because this was posted on some JDM forum and those guys snatched up all the samples.