Summer is finally here and that means it’s the start of show season. What better way to celebrate than to give away a brand new set of oCarbon trim? So how do you get in on this? It’s easy and only takes a moment. Step 1 Head on over to our Facebook page here: […]
we’ve done lately. B8 Audi: B6/B7 Audi: We’re also working on silver sets for a C5 Audi RS6 and a B5 Audi S4, so keep a look out for those on the blog.
I had a B5 S4 Avant customer who purchased a set of interior trim and wanted and wanted a little something extra for his exterior as well. He asked if I could do the B and C pillars for his S4. It took us a little while, but we were able to get it sorted. […]
Custom order from a very good customer of mine. OEM 5 star center caps wrapped in 20oz 2×2 twill. I’m very excited to see how these look on the car. I love subtle touches of carbon like this that might not get noticed by the average person.
Just got some new installed pictures of a 20oz 2×2 twill C5 set and have added them to the gallery. The full gallery can be found here. If you’re interested in having the same set made for your C5, check our product page: C5
for a B8 A4. It’s the first silver “carbon fiber” (which is actually aluminum coated fiberglass) trim set for a B8 we’ve done and it is turning out fantastic. The epoxy is all cured now and it will be trimmed down, sanded smooth, and clearcoated in the next week or so. I can’t wait to […]
We got the cores in from Germany yesterday, so I can start production on these in the next few days. By my count I have about 25 A4/S4 vent and MMI sets of cores, and close to 10 A5/S5 sets as well, so hopefully after this group buy is completed I’ll have plenty of cores […]
I have been promised better pictures this weekend when the owner has a bit more time to take proper ones. He says he is very happy with the pieces. They all fit perfectly and the install was “a breeze.” He did note that there were some subtle differences between the fabrics but they are unnoticeable once the […]
and I couldn’t be happier. I’m sorry these aren’t the best photos, but I wanted to post these up today because of how great they turned out. I’ll get the mini studio setup later this weekend and take some better photos and post them on Monday. MMI piece re-assembled. I will not be including the […]
Over the past few weeks I’ve been working on various improvements to help with the production of the B8 “OEM” carbon fiber vent and MMI pieces. I spent the last day or so making simple foam molds that help support the pieces under vacuum. Previous brackets would cave in under full vacuum. Running the pump […]
