It took us a few days to get the spray booth setup, but its finally done. We spent the majority of the day yesterday plumbing the new compressor to the new filter we picked up on Friday. All the hard work has paid off with a leak free system. Sam soldering the copper pipe. Multiple shut […]
I know there are quite a few of you that have been waiting paitently for us to clearcoat your parts. After a month delay, we finally got it in and are ready to plumb it to our new air compressor (an 80 gallon beast). We’ll get this all hooked up over the next day or […]
We’re moving! We signed a new lease last week and now are in a building that is twice as big as our old facility. Now we have the room we desperately needed to continue making cool parts (and hopefully we’ll be able to speed things up a bit too). The new space is only […]
I have been promised better pictures this weekend when the owner has a bit more time to take proper ones. He says he is very happy with the pieces. They all fit perfectly and the install was “a breeze.” He did note that there were some subtle differences between the fabrics but they are unnoticeable once the […]
and it will be shipping out shortly. We just need to give it a few days to cure before it gets a final polish and gets shipped out. I’ll make sure to post a bunch of pictures after everything is installed.
and I couldn’t be happier. I’m sorry these aren’t the best photos, but I wanted to post these up today because of how great they turned out. I’ll get the mini studio setup later this weekend and take some better photos and post them on Monday. MMI piece re-assembled. I will not be including the […]
Over the past few weeks I’ve been working on various improvements to help with the production of the B8 “OEM” carbon fiber vent and MMI pieces. I spent the last day or so making simple foam molds that help support the pieces under vacuum. Previous brackets would cave in under full vacuum. Running the pump […]
We’ve made a bunch of progress on these pieces in the last week or so. First and foremost, we got the bag system running multiple parts now. We’ve also made an upgrade to the molds that I’ll detail in a separate post because it is a neat little process. We’ve also had to deal with […]
We just started our first official set of BMW carbon fiber trim. It’s for a 2006 e90 325i sedan. We decided to wrap it in an upgraded 20oz 2×2 twill fabric to make sure the trim really stood out. Once this is done we’ll start an e92 set (hopefully from an M3) and it will […]
We have a few more interior shots from the Adam’s Rotors feature on StanceWorks. A full, detailed write up can be found here: http://www.stanceworks.com/2011/02/rotors8/ This set was a custom made 9oz plain weave. I’ve only done a few sets in this particular fabric, so it’s pretty rare. The Adam’s Rotors logo embedded in the epoxy […]
Got a bunch of these in a little bit ago and have begun production on them. The goal will be to produce these in a 8 harness satin weave (8HS) so that they are similar to the OEM carbon atlas trim found in the B8 S4. We’re going to be doing these pieces differently than […]