After getting the CTS-V pieces wrapped over the weekend, it was time to start brushing on the epoxy. The red kevlar does not soak up the epoxy very well, so it takes a few coats to get it saturated. The black 8HS fabric is easily wetted out though. Only took a few coats for the […]
Not the best pictures in the world, but I appreciate the efforts of the owner. I’m really happy with how these silver sets are turning out. I’ve got one B6/B7 silver set for a manual that is ready to go right now, so if you’re interested in it, shoot me an email. Full gallery here […]
Our first sweepstakes is in the books and the winners have been drawn. I ended up giving away a second grand prize and a few extra second place prizes as well. If you didn’t win, don’t fret. I’ll be emailing everyone a little bonus in a few days, so keep your eyes open for that. […]
we’ve done lately. B8 Audi: B6/B7 Audi: We’re also working on silver sets for a C5 Audi RS6 and a B5 Audi S4, so keep a look out for those on the blog.
A former Audi customer of mine contacted me a few weeks ago about doing a custom set of carbon fiber trim for his 2008 Cadillac CTS-V. I’ve always wanted to do a higher end American car, especially one that performs as well as the CTS-V, so I happily obliged. The trim I got from him is […]
Just got some new installed pictures of a 20oz 2×2 twill C5 set and have added them to the gallery. The full gallery can be found here. If you’re interested in having the same set made for your C5, check our product page: C5
for a B8 A4. It’s the first silver “carbon fiber” (which is actually aluminum coated fiberglass) trim set for a B8 we’ve done and it is turning out fantastic. The epoxy is all cured now and it will be trimmed down, sanded smooth, and clearcoated in the next week or so. I can’t wait to […]
I have been promised better pictures this weekend when the owner has a bit more time to take proper ones. He says he is very happy with the pieces. They all fit perfectly and the install was “a breeze.” He did note that there were some subtle differences between the fabrics but they are unnoticeable once the […]
and it will be shipping out shortly. We just need to give it a few days to cure before it gets a final polish and gets shipped out. I’ll make sure to post a bunch of pictures after everything is installed.
and I couldn’t be happier. I’m sorry these aren’t the best photos, but I wanted to post these up today because of how great they turned out. I’ll get the mini studio setup later this weekend and take some better photos and post them on Monday. MMI piece re-assembled. I will not be including the […]
Over the past few weeks I’ve been working on various improvements to help with the production of the B8 “OEM” carbon fiber vent and MMI pieces. I spent the last day or so making simple foam molds that help support the pieces under vacuum. Previous brackets would cave in under full vacuum. Running the pump […]